Efficient production of high specific activity 64Cu using a biomedical cyclotron

Nucl Med Biol. 1997 Jan;24(1):35-43. doi: 10.1016/s0969-8051(96)00157-6.

Abstract

Copper-64 (T 1/2 = 12.7 h) is an intermediate-lived positron-emitting radionuclide that is a useful radiotracer for positron emission tomography (PET) as well as a promising radiotherapy agent for the treatment for cancer. Currently, copper-64 suitable for biomedical studies is produced in the fast neutron flux trap (irradiation of zinc with fast neutrons) at the Missouri University Research Reactor. Access to the fast neutron flux trap is only possible on a weekly basis, making the availability of this tracer very limited. In order to significantly increase the availability of this intermediate-lived radiotracer, we have investigated and developed a method for the efficient production of high specific activity Cu-64 using a small biomedical cyclotron. It has been suggested that it may be possible to produce Cu-64 on a small biomedical cyclotron utilizing the 64Ni(p,n)64Cu nuclear reaction. We have irradiated both natural nickel and enriched (95% and 98%) Ni-64 plated on gold disks. Nickel has been electroplated successfully at thicknesses of approximately 20-300 mm and bombarded with proton currents of 15-45 microA. A special water-cooled target had been designed to facilitate the irradiations on a biomedical cyclotron up to 60 microA. We have shown that it is possible to separate Cu-64 from Ni-64 and other reaction byproducts rapidly and efficiently by using ion exchange chromatography. Production runs using 19-55 mg of 95% enriched Ni-64 have yielded 150-600 mCi of Cu-64 (2.3-5.0 mCi/microAh) with specific activities of 94-310 mci/microgram Cu. The cyclotron produced Cu-64 had been used to radiolabel PTSM [pyruvaldehyde bis-(N4-methylthiosemicarbazone), used to quantify myocardial, cerebral, renal, and tumor blood flow], MAb 1A3 [monoclonal antibody MAb to colon cancer], and octreotide. A recycling technique for the costly Ni-64 target material has been developed. This technique allows the nickel eluted off the column to be recovered and reused in the electroplating of new targets with an overall efficiency of greater than 90%.

Publication types

  • Research Support, U.S. Gov't, Non-P.H.S.
  • Research Support, U.S. Gov't, P.H.S.

MeSH terms

  • Copper Radioisotopes*
  • Cyclotrons / instrumentation*
  • Equipment Design
  • Tomography, Emission-Computed

Substances

  • Copper Radioisotopes